Skip to content

Home / Design Notes

Home Lighting Design: How to Plan the Lighting for a Whole House

Good lighting is planned before the walls are closed. The three layers, a room-by-room plan, switching and dimming, consistent colour, and when a lighting designer is worth it.

21 November 2026 · 2 min read

Home Lighting Design: How to Plan the Lighting for a Whole House
Photo: ArtDreams92 / Pixabay

Lighting design is easiest and cheapest before plastering, when cables can still run anywhere. Whether you are building, renovating or just re-thinking a rental, the same principles apply: layer the light, plan for how each room is used, and keep the colour consistent.

The three layers

LayerPurposeExamples
AmbientGeneral light to move aroundPendants, ceiling lights, downlights, cove lighting
TaskLight for specific jobsUnder-cabinet strips, reading lamps, mirror lights
AccentMood, depth and focusWall washers, picture lights, uplights, garden lights

Room-by-room plan

RoomKey ideasGuide
KitchenBench task light, island pendants, downlights in front of benchesKitchen
LivingLamps at seated height, wall lights, dimmable ambientLounge room
DiningOne statement pendant or linear fitting on a dimmerDining room
BedroomsSoft ambient, bedside lights, wardrobe lightingBedroom
BathroomsMirror light from the sides, IP-rated fittingsBathroom
Hallways and stairsWall lights, step lights, sensorsHallway
OutdoorsPaths, entry, deck, a few uplit treesOutdoor

Switching and dimming

  • Put each layer on its own switch; dim at least ambient and pendants.
  • Two-way switching at both ends of hallways and stairs.
  • A switch at the door for the light you need first when you enter.
  • Consider smart switches or scenes for living areas.

Consistency

  • One colour temperature per space, usually warm white (2700–3000 K) in living areas.
  • High colour rendering (CRI 90+) where colour matters: kitchens, bathrooms, artwork.
  • Avoid a grid of downlights; place light where it is needed.

Working with professionals

A lighting designer is worth considering for new builds and major renovations: they plan layers, fittings and switching together. Even without one, draw a simple plan of each room with furniture positions before talking to your electrician, who must carry out all fixed wiring.

In Australia, installing or replacing hard-wired lighting must be done by a licensed electrician.

Questions

How do you plan lighting for a house?

Layer ambient, task and accent light, plan each room by its use, put layers on separate switches and dimmers, and keep colour consistent.

When should lighting be planned in a renovation?

Before plastering, while cables can still be run easily.

Do I need a lighting designer?

It is worthwhile for new builds and big renovations; for smaller projects a clear plan for your electrician often suffices.

Read next